Horizontal Form Fill and Seal Machines - Online Inquiry

Omori has vast experience in horizontal wrapping and can combine their technologies to meet almost any need. Please advise us of your product, its characteristics and dimensions and how you would like your pack to appear.  (All machines have print registration as standard).  We will then contact you to discuss a suggested proposal.

(Alternatively, please just leave your contact details and ask us to call)

Contact Information

(We won't ask you to retype your email address but please check it is correct)

Please check/uncheck as appropriate:

Send product literature
Have a salesperson contact me

Please name or describe the products/configurations that you wish to wrap with Dimensions in the form L= W= H=:

(Omori HFFS machines have 100 product memories but if you don't wish to list them all now, just list largest & smallest and describe the range.  We can talk to you about it if anything is unclear)

General Product Characteristics as presented for packaging

Food Non-food

Nature of Product (please check as applicable)

Robust  Fragile   Soft  Hard Dry Wet   Sticky   Loose Pieces 

Temperature

Hot Warm Ambient Chilled Frozen

Interactive Characteristics

Corrosive     Moisture Sensitive    Oxygen Sensitive    Light sensitive

Bacteriologically Sensitive     Absorbent    Other (please describe in box below)

if you checked "Other", please describe:

please describe any change in product characteristics after packing or treatment such as freezing, vacuum packing, sterilization, etc:

Product orientation (in direction of travel) as presented for packaging:

Long Edge (L) Leading   Short Edge (W) Leading  

Flat   On Edge   Random  Other (please describe in box below)

if you checked "Other", please describe:

How Product is Presented and fed to the machine:

By Hand (manual feed)    Evenly Spaced on belt   Randomly Spaced on belt

Bulk - requires unscrambler/feed system

Collation / Grouping:

Already Grouped as presented   Presented single for collation (please describe collation in box below)

Your Desired Packaging Style:

Match Existing (please describe in box below)

HFFS Pillow   With Gusset   Hermetic (Air/gas tight) seals MAP (Gas Flush

HFFS Pillow Offset Center Seal   3-sides Seal (sidefold) 4-sides seal (sachet style)

End Seals Folded   And Glued  

Straight Cut   ZigZag

V Notch (Easy Open)   I Notch (Easy Open)

Barrier (Hermetic) Shrink   Presentation Shrink   Collation Shrink

Packaging Material:

If you have a preferred packaging material, please specify in the box below:

Coding:

Inkjet   Hot Ink   Hot Foil    Laser   Label Top   Label Bottom

If you have a preferred coder supplier, please indicate and type the name/model in the box below:

Speed:

Required output speed:

Notes:

Please add any additional notes or requirements which you feel will be useful:

When you need a machine to have been commissioned and be ready to run:

We hope that you have found it convenient to complete this form on-line.  After perhaps contacting you for clarification, we will use the information to narrow down the options and then contact you again with some proposals.

We do not share your information except as necessary to fulfill your specific inquiry.

Thank you for your interest and for your inquiry.  Just click "Submit Inquiry" below.